# How to Set Up Bookmap for Order Flow: Heatmap, DOM and Icebergs Step by Step

> How to set up Bookmap for order flow: calibrate the heatmap, connect a data feed and turn on Stops & Icebergs step by step.

- Canonical: https://traderprofesional.com/en/bookmap-setup/
- Site: Trader Profesional (https://traderprofesional.com) — order flow trading
- Language: en
- Published: 2026-10-05

---


[Bookmap](https://bookmap.com/) doesn't draw a footprint chart: it draws the entire order book evolving over time, with a heatmap for passive liquidity and Volume Bubbles for what actually gets executed. That's why setting it up doesn't look like setting up ATAS, Sierra Chart or NinjaTrader: there's no imbalance threshold to raise, there's a heatmap to calibrate before it stops being a wash of color and starts showing real support and resistance. Here are the steps.

## What you need before touching a setting

Bookmap sells the software on one side and the data on the other: the license doesn't bundle a market feed, so you need to connect a provider or compatible broker separately. For futures, the usual options are Rithmic (with MBO data and full depth), dxFeed or CQG Continuum, with Interactive Brokers, TradeStation and TD Ameritrade (via thinkorswim) among the compatible brokers. For crypto, Bookmap connects directly to several exchanges. Without that per-level feed contracted on its own, the heatmap has nothing to paint, the same data requirement any [order flow platform](/en/best-order-flow-platforms/) has, it's just that here the split between software and data is more separate than in other suites.

## The heatmap: calibrate it before trusting the colors

Bookmap's heatmap shows the historical limit order book: how passive liquidity has moved level by level over time, not just a snapshot of the instant. To make it readable from minute one, there are three settings in its configuration window (the studies panel or the slider above the chart):

- **Color scheme.** Bookmap ships several heatmap color scales; the default one ranges from black through blue, yellow, orange and red as size grows, with two more scales available if that combination isn't clear to you.
- **Cut-off.** Defines the size above which a cell gets painted with the solid color reserved for the highest (and lowest) liquidity on the book. This is the setting that changes what you see the most: with a bad cut-off, the whole book looks the same color and you can't tell where the real wall is.
- **Dimming.** Darkens the heatmap until the price lines turn nearly black. It's the only heatmap setting that's toggled from the toolbar instead of the configuration panel, so if you brush it by accident the whole heatmap goes dark and it looks like something broke.

## Volume Bubbles: aggression on top of the heatmap

If the heatmap shows passive liquidity, **Volume Bubbles** show the opposite: the volume that actually got executed at each price, overlaid on the same chart. It's the piece that turns the heatmap into a full order flow read instead of just a depth map, you see the passive wall and, on top of it, the size of the aggressive hits testing it.

The two together are where Bookmap earns its keep: a large bubble hitting a level the heatmap has been painting dark for several seconds is the same [absorption](/en/absorption-trading/) read you'd make on a footprint chart, just seen unfolding in time instead of level by level inside a closed bar.

## Stops & Icebergs: detecting icebergs and executed stops

Bookmap has a separate add-on called **Stops & Icebergs** (not "Liquidity Tracker," a name that circulates on forums but isn't the real one), bundled in its MBO Bundle and distributed through Bookmap's own marketplace, which tracks the evolution of [iceberg orders](/en/iceberg-orders/) and the execution of stop orders, marking on the chart itself when an iceberg is detected, when it's being filled, when it runs out or gets canceled, and also the stops that trigger. The important catch before turning it on: it only works with real-time, non-aggregated CME MBO (Market by Order) data, so if your feed doesn't reach that level of detail, the add-on has nothing to work with.

## Operating system

Bookmap runs on Windows, Mac and Linux, though Linux support is more limited than the other two. You don't need to virtualize like you would with the full ATAS suite or with Sierra Chart: if your reason for looking at Bookmap was avoiding Windows, that's not a problem here. If instead your reason is price, the heatmap itself, or you prefer classic footprint charts, the real alternatives are in [Bookmap alternatives](/en/bookmap-alternatives/).

## First run: what to check in order

1. Connect the feed (Rithmic, dxFeed, CQG Continuum or your compatible broker) before expecting anything from the heatmap: without per-level data there's nothing to paint.
2. Adjust the heatmap's **Cut-off** until you can tell levels with real liquidity apart from the ones without it. It's the step most people skip, and then say "the heatmap doesn't make sense."
3. Turn on **Volume Bubbles** and watch for a while how aggression behaves against a level the heatmap is already painting dark, before drawing any conclusion from a single session.
4. If you're after icebergs and stops, confirm first that your feed is non-aggregated CME MBO. If it isn't, the **Stops & Icebergs** add-on won't do anything for you no matter how you set it up.

If you're actually looking for the same thing on another platform, the equivalent steps for [ATAS](/en/atas-setup/), [NinjaTrader](/en/ninjatrader-setup/) or [Sierra Chart](/en/sierra-chart-setup/) are published separately: none of the three reads the book the way Bookmap does, so the setup isn't interchangeable. If you're still deciding between Bookmap and Sierra Chart before setting up either one, with no ClusterDelta in the mix, the direct heatmap-vs-Numbers-Bars comparison is in [Bookmap vs Sierra Chart](/en/bookmap-vs-sierra-chart/).

## Frequently Asked Questions

### Do I need to buy data separately from the Bookmap license?

Yes. Bookmap doesn't bundle data or brokerage into the software package: you need to connect a provider like Rithmic, dxFeed or CQG Continuum, or a compatible broker, or buy the data subscription directly through Bookmap.

### What is Stops & Icebergs, and is it included with Bookmap?

It's the add-on that detects iceberg orders and marks stop executions directly on the chart. It sits apart from the base software, inside Bookmap's MBO Bundle on its own marketplace, and it also requires real-time, non-aggregated CME MBO data: without that level of data, it doesn't work even once you turn it on.

### Why does my heatmap look like one solid color?

It's almost always a badly calibrated Cut-off: that value decides the size above which a cell gets painted with the solid color reserved for the highest liquidity. Check it first, and also make sure you haven't accidentally toggled Dimming from the toolbar, which darkens the whole heatmap independently of that setting.

### Does Bookmap have a footprint chart like ATAS or ClusterDelta?

No. Bookmap is built around the liquidity heatmap and Volume Bubbles, not a cell-by-cell footprint. If what you want is a classic footprint with per-level imbalances, the real options are in [Bookmap alternatives](/en/bookmap-alternatives/).